5005 एल्यूमीनियम शीट

मिश्र धातु 5000 श्रृंखला
गुस्सा एफ,हे,H12,H14,H16,H18,H22,H24,H26,H28,H32,H34,H112,H114
चौड़ाई 80मिमी-2800 मिमी
मोटाई 0.2mm-500mm
लंबाई 100मिमी-12000 मिमी
तकनीकी गर्म लपेटा हुआ ( डीसी ), कोल्ड रोलिंग ( सीसी ), फेंकना

क्या करता है 5005 aluminum sheet mean?

क्या है 5005 ऐल्युमिनियम की प्लेट? 5005 is a common type of 5 श्रृंखला एल्यूमीनियम प्लेट, which belongs to Al-Mg alloy, and the magnesium content is 3%-5%. The strength of en aw-5005 aluminum sheet is the same as that of 3003 एल्यूमीनियम शीट, and it has good workability and corrosion resistance. एल्यूमीनियम शीट 5005 is one of the more commonly used products in aluminum sheet and strip materials, also known as thermal insulation aluminum sheet, which can be well adapted to the use of pipeline thermal insulation packaging.The metal elements contained in the 5005 aluminum plate are as follows:

5005 aluminum alloy composition: अली:Remaing; और:≤0.30; घन:0.20; मिलीग्राम:0.5-1.1; Zn:0.25; एम.एन.:0.20; करोड़:≤0.10; फ़े:0.7

5005 एल्यूमिनियम शीट प्लेट

5000 Series Al+Mg Alloy

5005 बिक्री के लिए एल्यूमीनियम शीट

5005 aluminum sheet properties

The widespread use of 5005 aluminum alloy sheet benefits from the superior performance of 5005. Whether it is for household or industrial processing, a5005 aluminum sheet is a better raw material.

तन्य शक्ति (बी) (एमपीए) 155~195
सशर्त उपज ताकत σ0.2 (एमपीए) 125
बढ़ाव 5 (%) 2
टिप्पणी: Tensile mechanical properties of strip at room temperature
Sample size: strip thickness>0.8~1.3
State: Aluminum and aluminum alloy cold-rolled strip (0.8~1.3mm, एच16, एच26, H36 state)
The aluminum plates provided by Huawei Aluminum can meet the performance requirements.

5005 aluminum sheet for selling

Annealing process of 5005 ऐल्युमिनियम की प्लेट

Production process: melting and casting → uniform fire → sawing → milling → heating → hot rolling → medium temperature rolling → pre-cutting → finished annealing → straightening → cutting finished products → finished product acceptance.

Do annealing temperature affect the properties of 5005 sheet?

With the increase of the annealing temperature and the prolongation of the holding time, the tensile strength and yield strength of the 5005 aluminum alloy sheet gradually decreased, and the elongation increased gradually. The process of crystallization and grain growth. Before the annealing temperature of 200℃, the tensile strength, yield strength and elongation of the 5005 aluminum alloy sheet did not change significantly, and it was in the recovery stage at this time.

When the temperature is 200 ℃ ~ 310 ℃, the mechanical properties of the sheet change greatly. In this temperature range, a large number of new grains (ie nuclei) appear in the cold working structure, and gradually grow up, forming at 310 ℃, आदि. The recrystallized grains of the shaft basically complete the recrystallization process. When the temperature is higher than 310 डिग्री सेल्सियस, the mechanical properties of the sheet do not change much and begin to stabilize, indicating that the recrystallization process has been completed.

इसलिए, the annealing holding time has little effect on the tensile strength, yield strength and elongation of 5005 aluminum alloy sheet.

के बीच भिन्नता 5005 aluminum plate and other alloys

Among the 5000 series aluminum plates, in addition to 5005, there are🔗5083 एल्यूमीनियम शीट,🔗5052 aluminum plates, 5252 aluminum plates, 5454 aluminum plates, 5754 aluminum plates, 5A02 aluminum plates, and 5A03 aluminum plates. के बीच भिन्नता 5005 and the same series of alloy plates is not big, but it is quite different from 3003 aluminum plate of 3000 श्रृंखला, 🔗6061 aluminum sheet of 6000 श्रृंखला, and🔗6082 ऐल्युमिनियम की प्लेट.

What is the difference between 3003 तथा 5005 अल्युमीनियम?

अल्युमीनियम 5005 बनाम 3003: की ताकत 5005 aluminum plate is equivalent to that of 3003. 5005 belongs to aluminum-magnesium alloy and is not hardened by heat treatment. It can increase the hardness by cold rolling. 3003 belongs to aluminum-manganese alloy, जिसे उष्मा उपचार द्वारा मजबूत नहीं किया जा सकता है, and its mechanical properties are improved by cold working method. Good workability 5005 aluminum plate is similar to 3003 मिश्र धातु, with medium strength and good corrosion resistance.

What is the difference between 5005 तथा 5052 aluminium?

5005 aluminum sheet for dashboard housing एल्यूमीनियम शीट 5005 for dashboard housing

1. The aluminum plate is cut flat
We use advanced equpments and make the cutting edge smooth, without burrs on the edges. The normal tolerance of cutting processing is 0.1-0.5mm.
2. Aluminum plate production specifications are complete
All kinds of specifications are complete.from to.6mm~720mm
According to different grades and materials, individual grades can be customized with 1000mm thick aluminum plates, and advanced equipment technology can meet your different needs.
3. Support customized processing
Support the cut accoding the needs of customers can be cut at will, the company has rich and advanced processing equipment, according to the different sizes and specifications of aluminum plates and aluminum bars, our company has more than a dozen imported/domestic equipment.
4. Product quality clearance
The surface of the aluminum plate is smooth, the flatness is high, and the interior invisible to the naked eye has been strictly tested by a variety of imported instruments, such as direct reading spectrometers, ultrasonic flaw detectors, आदि.


कोई समीक्षा के लिए अभी तक कर रहे हैं.

समीक्षा करने वाले प्रथम व्यक्ति बनें "5005 एल्यूमीनियम शीट”

आपकी ईमेल आईडी प्रकाशित नहीं की जाएगी. आवश्यक फ़ील्ड चिह्नित हैं *