알루미늄판의 용도와 분류기준

알루미늄판의 일반적인 용도와 분류 기준은 무엇입니까?

알루미늄 시트의 일반적인 용도는 다음과 같습니다.:
1-8 시리즈 알루미늄 합금 플레이트는 조명에 자주 사용됩니다.; 태양 반사판; 건물 장식; 인테리어 장식: 천장, 벽, 등.; 가구, 캐비닛; 엘리베이터; 표지판, 명찰, 바지; 자동차의 내외장 장식; 실내 장식: 사진 액자 같은 것 , 알루미늄 판 그림, 안도, 등.; 가전 ​​제품: 냉장고, 전자 레인지, audio equipment, 등.; aerospace and military aspects, such as China’s large aircraft manufacturing, Shenzhou spacecraft series, satellites, 등.; 기계 부품 가공; mold manufacturing; chemical industry, insulation pipes cladding;

알루미늄 판은 일반적으로 다음 두 가지 유형으로 나뉩니다.:

1. 두께로 나누기: (단위: mm)

박판 (알루미늄 시트) 0.15-2.0
일반 접시 (알루미늄 시트) 2.0-6.0
중판 (알루미늄 판) 6.0-25.0
후판 (알루미늄 판) 25-200 위의 매우 두꺼운 판 200

2. 합금 조성에 따라, 로 나누어진다:

고순도 알루미늄 판 (이상의 함량을 가진 고순도 알루미늄으로 압연 99.9%)
순수한 알루미늄 판 (컴포지션은 기본적으로 순수한 알루미늄으로 압연됩니다.)
합금 알루미늄 판 (알루미늄 및 보조 합금으로 구성, 일반적으로 알루미늄-구리, 알루미늄-망간, 알루미늄-실리콘, 알루미늄-마그네슘, 등.)
복합 알루미늄 플레이트 또는 브레이징 플레이트 (special-purpose aluminum plate material obtained by compounding multiple materials)
Aluminum-clad aluminum plate (aluminum plate is clad with thin aluminum plate for special purpose)

In the aluminum alloy, the grade is representative. The following is an example based on the grade of 7075T651 aluminum plate. 첫번째 7 represents the group of aluminum and aluminum alloysaluminum-zinc-magnesium alloys. The aluminum and aluminum alloy groups are divided into nine categories. 그 중, 1, 3, 5, 6, 그리고 7 series of aluminum and aluminum alloys are the main ones, 그리고 그들 중, 1 시리즈와 3 시리즈 알루미늄 판은 가장 일반적으로 사용됩니다., 및 다른 시리즈는 실제 사용에 덜 사용됩니다..

첫 번째 범주: 1 시리즈: 산업용 순수 알루미늄
두 번째 범주: 2 시리즈: 알루미늄 구리 합금
세 번째 범주: 3 시리즈: 알루미늄 망간 합금
네 번째 카테고리: 4 시리즈: 알루미늄-실리콘 합금
다섯 번째 카테고리: 5 시리즈: 알루미늄-마그네슘 합금
여섯 번째 카테고리: 6 시리즈: 알루미늄-마그네슘-실리콘 합금
일곱 번째 카테고리: 7 시리즈: Al-Zn-Mg-Cu 합금
여덟 번째 카테고리: 8 시리즈: 다른 합금
아홉 번째 카테고리: 9 시리즈: 예비 합금

Technical quality requirements of aluminum plate:

1. The most basic point is that the surface of the plate must be clean, and no cracks or other oxidized impurities are allowed.
2. Due to the imperfection of the process, the surface of the plate is allowed to have defects such as dents, scratches or roll marks, but its depth must not exceed the allowable negative deviation of the plate. If the deviation exceeds the value, it will be remade.
3. 공정 알루미늄 클래드 후판은 클래딩층의 셰딩 부분과 클래딩층의 기포를 허용합니다..
4. 정상적인 상황에서, 판의 표면은 두께 차이 범위 내에서 결함을 수리 및 제거할 수 있습니다..
5. 일부 다른 요구 사항은 주로 수요자와 공급자 자체로 작성됩니다., 그런 다음 프로세스가 변경됩니다..

위는 알루미늄 판 표면의 품질 요구 사항에 관한 것입니다.. 어떤 이유로 인해 특정 오류가 있을 수 있지만, it must not exceed the controllable deviation value.

코멘트를 남겨주세요

귀하의 이메일 주소는 공개되지 않습니다. 필요 입력 사항은 표시되어 있습니다 *