What does 5005 aluminum sheet mean?
Co jest 5005 Aluminiowa płyta? 5005 is a common type of 5 series aluminum plate, which belongs to Al-Mg alloy, and the magnesium content is 3%-5%. The strength of en aw-5005 aluminum sheet is the same as that of 3003 arkusz aluminium, and it has good workability and corrosion resistance. Arkusz aluminium 5005 is one of the more commonly used products in aluminum sheet and strip materials, also known as thermal insulation aluminum sheet, which can be well adapted to the use of pipeline thermal insulation packaging.The metal elements contained in the 5005 aluminum plate are as follows:
5005 aluminum alloy composition: Glin:Remaing; Si:≤0.30; Cu:≤0.20; Mg:0.5-1.1; Zn:≤0.25; Mn:≤0.20; Cr:≤0.10; Fe:≤0.7
|5005 blacha aluminiowa
5000 Series Al+Mg Alloy
5005 aluminum sheet properties
The widespread use of 5005 aluminum alloy sheet benefits from the superior performance of 5005. Whether it is for household or industrial processing, a5005 aluminum sheet is a better raw material.
|Tensile strength σb (MPa)||155～195|
|Conditional yield strength σ0.2 (MPa)||≥125|
|Elongation δ5 (%)||≥2|
|Note: Tensile mechanical properties of strip at room temperature
Sample size: strip thickness＞0.8～1.3
State: Aluminum and aluminum alloy cold-rolled strip (0.8～1.3mm, H16, H26, H36 state)
The aluminum plates provided by Huawei Aluminum can meet the performance requirements.
Annealing process of 5005 Aluminiowa płyta
Production process: melting and casting → uniform fire → sawing → milling → heating → hot rolling → medium temperature rolling → pre-cutting → finished annealing → straightening → cutting finished products → finished product acceptance.
Do annealing temperature affect the properties of 5005 sheet？
With the increase of the annealing temperature and the prolongation of the holding time, the tensile strength and yield strength of the 5005 aluminum alloy sheet gradually decreased, and the elongation increased gradually. The process of crystallization and grain growth. Before the annealing temperature of 200℃, the tensile strength, yield strength and elongation of the 5005 aluminum alloy sheet did not change significantly, and it was in the recovery stage at this time.
When the temperature is 200 ℃ ~ 310 ℃, the mechanical properties of the sheet change greatly. In this temperature range, a large number of new grains (ie nuclei) appear in the cold working structure, and gradually grow up, forming at 310 ℃, itp. The recrystallized grains of the shaft basically complete the recrystallization process. When the temperature is higher than 310 °C, the mechanical properties of the sheet do not change much and begin to stabilize, indicating that the recrystallization process has been completed.
Dlatego, the annealing holding time has little effect on the tensile strength, yield strength and elongation of 5005 aluminum alloy sheet.
The difference between 5005 aluminum plate and other alloys
Among the 5000 series aluminum plates, in addition to 5005, there are🔗5083 arkusz aluminium,🔗5052 aluminum plates, 5252 aluminum plates, 5454 aluminum plates, 5754 aluminum plates, 5A02 aluminum plates, and 5A03 aluminum plates. The difference between 5005 and the same series of alloy plates is not big, but it is quite different from 3003 aluminum plate of 3000 seria, 🔗6061 aluminum sheet of 6000 seria, and🔗6082 Aluminiowa płyta.
What is the difference between 3003 I 5005 aluminium?
Aluminum 5005 vs 3003: The strength of 5005 aluminum plate is equivalent to that of 3003. 5005 belongs to aluminum-magnesium alloy and is not hardened by heat treatment. It can increase the hardness by cold rolling. 3003 belongs to aluminum-manganese alloy, which cannot be strengthened by heat treatment, and its mechanical properties are improved by cold working method. Good workability 5005 aluminum plate is similar to 3003 stop, with medium strength and good corrosion resistance.
What is the difference between 5005 I 5052 aluminium?
We use advanced equpments and make the cutting edge smooth, without burrs on the edges. The normal tolerance of cutting processing is 0.1-0.5mm.
2. Aluminum plate production specifications are complete
All kinds of specifications are complete.from to.6mm~720mm
According to different grades and materials, individual grades can be customized with 1000mm thick aluminum plates, and advanced equipment technology can meet your different needs.
3. Support customized processing
Support the cut accoding the needs of customers can be cut at will, the company has rich and advanced processing equipment, according to the different sizes and specifications of aluminum plates and aluminum bars, our company has more than a dozen imported/domestic equipment.
4. Product quality clearance
The surface of the aluminum plate is smooth, the flatness is high, and the interior invisible to the naked eye has been strictly tested by a variety of imported instruments, such as direct reading spectrometers, ultrasonic flaw detectors, itp.